The rapid development of intelligence has brought significant changes to people's lives. The rapid development of computer technology has also driven the rapid development of computer infrastructure construction. Nowadays, whether in complex large data center rooms or simple small and medium-sized rooms, more and more electrical equipment is being deployed in the rooms.

The rapid development of intelligence has brought significant changes to people's lives. The rapid development of computer technology has also driven the rapid development of computer infrastructure construction. Nowadays, whether in complex large data center data centers or simple small and medium-sized data centers, more and more electrical equipment is being deployed in the data centers.

Correct usage of water immersion sensors in the computer room renovation plan

The computer room renovation project is one of the projects that many communication professionals are currently working on. With technological updates and the development of enterprises, the original computer room configuration cannot meet current needs, and there are high requirements for confidentiality and timeliness. Therefore, higher standards are put forward for the network system equipment and environment of the computer room. Many enterprises choose to upgrade and renovate the computer room.

To ensure the safety, stability, and effective operation of the computer room, as well as the good operation status, service life, and safety of network equipment, 24-hour real-time monitoring and intelligent adjustment and control of various environmental variables such as power supply, temperature, humidity, water leakage, and air dust content in the network operating environment are usually carried out to ensure the stability of the network operating environment, the security of network software and hardware resources, equipment, and related information data assets.

As an important part of the computer room environmental monitoring system, the water immersion sensor is mainly used to monitor whether there is water leakage in areas with water sources such as fire water pipes and domestic water pipes. Once a water leak occurs, it will trigger the water immersion sensor, report the danger, and the linkage gateway will issue an audible and visual alarm. At the same time, the detector will send the alarm information to the mobile app and issue an alarm, reminding people to take timely measures to prevent water leakage and property damage. So what are the reasons for water leakage in the computer room?

1. The generator in the computer room is leaking.

2. The heating equipment in the computer room is leaking.

3. Leakage or seepage on walls or rooftops.

4. Water ingress caused by loose doors and windows on rainy days.

5. The water pipes or fire protection system pipes in the computer room are blocked and leaking.

How should we use water immersion sensors correctly and reasonably to monitor the water leakage situation in the computer room?

At present, there are two main methods for leak detection: point type water immersion sensors and distributed water immersion sensors. Point type water immersion sensors are determined by environmental conditions and the distribution of sensing points, and leaks may expand significantly, which cannot guarantee their reliability. Distributed water immersion sensors surround the water source with special ropes, which can truly prevent problems before they occur and reduce harm.

（1） Exclusion method for point type water immersion sensor:

1. Check for any leaking water sources.

2. Check if the point type water immersion sensor is in contact with metal

3. Check if the point type water immersion sensor is too close to the humidifier of the air conditioner, causing an alarm due to excessive humidity during humidification and automatic recovery of the alarm after the water dries.

（2） Methods for eliminating distributed water immersion sensors:

1. Check for any leaking water sources.

2. Check if the water immersion sensing rope is in contact with the metal

3. Check if the water immersion sensing rope is too close to the humidifier of the air conditioner, causing an alarm due to excessive humidity and leakage during humidification.

Methods for eliminating distributed water immersion sensors:

1. Check for any leaking water sources.

2. Check the water immersion sensing rope to see if it is too close to the humidifier of the air conditioner, causing an alarm due to excessive humidity during humidification.

3. Check if the leakage sensing rope is too dirty, has oil stains, or small water droplets that may trigger an alarm. If this is the case, please clean the leakage sensing rope.